chimney savers

 

chimney relining

Choose The Application For Your Liner

or


Chimney_Liners_-_solid_fuel_applications.html

Chimney_Liners_-_heating_system_applications.html
Chimney Liner for:
gas and oil heating systems - furnaces, boilers & water heatersChimney_Liners_-_heating_system_applications.html
chimney liner for: 
wood stoves, coal stoves, pellet stoves  or fireplacesChimney_Liners_-_solid_fuel_applications.html

Copyright Chimney Savers


For information on 
Chimney Liner Sales Scams 
click this linkConsumer_Alert___Chimney_Sweeping_scams.html
For information on 
Flue Sealant Scams (Thermocrete and Heat Shield) 
click this linkConsumer_Alert___Thermocrete_%26_Heat_Shield.html

Why line your chimney at all?

  1. 1.Older homes have no lining at all, which is very

dangerous because of toxic fumes and heat transfer

issues!




  1. 2.Most homes that do have chimney liners

have clay tile liners which can wear out quickly

from use by today’s efficient home heating appliances.





  1. 3.In fireplace and wood stove applications clay tile

liners are easily destroyed by a chimney fire, usually

due to creosote buildup.


Common issues:

Heat Protection

The masonry components of a chimney conduct heat. If the temperature is high - as in a chimney fire - enough heat can be transmitted through the brick or stone to ignite combustibles near the chimney - wood framing, sheetrock, lath, debris, etc.


A properly installed flue liner reduces the transfer of this heat and keeps the fire in the chimney. Many insurance companies and all building codes require a properly installed lining before a chimney can be used.

 

Air Quality and Toxic Fumes

All fossil fuels give off toxic or irritating fumes when burned. Some (oil and gas) contain high levels of carbon monoxide and nitrous oxide which are dangerous at certain concentrations. People with respiratory problems can be sensitive to these irritants even at low levels as well as to wood smoke and coal soot.


A flue liner assures that these exhausts are vented from the structure with no leakage through the casing or into the structure's walls.

 

Chimney Deterioration

Chimney fires and some fuels (oil, gas, coal) can severely deteriorate a chimney after repeated use. Chimney fires dehydrate mortar so that the bond is loosened. Oil and gas "bathe" the chimney in very acidic water vapor - eating away at the interior.


It is relatively easy to see deterioration when bricks

and stone are loosened and fall from the top.

Not so noticeable are the holes that develop between

flues and in the casing walls. Furnace flues may

become clogged by mortar and debris falling from

interior walls and deteriorated flue tiles.


A pumped cast in place masonry liner repairs all of these holes, cracks and deteriorated mortar joints, re-bonding the chimney into one secure structure.

 

Improper Draft – Sizing Requirements

Flues can be too small (not enough draft) or too large (not enough velocity or too much air volume) to draw properly. An inefficient flue often causes smoke or exhaust leakage into the structure, which can cause furnaces and stoves to consume extra fuel and can increase creosote accumulation. A properly sized and insulated flue can increase efficiency dramatically. The problems associated with too small a flue are usually obvious to most people. So we find that many people think that over sizing a flue is a good thing to do…WRONG!!!


In heating applications (such as: furnaces, boiler and hot water heaters) an oversized flue decreases velocity which can allow poisonous flue gases to easily enter the home (also it can take the flue to long to heat up which decreases draft). In fact building codes do not allow the square area of a flue to be over seven times the square area of an appliances exhaust outlet.


In fireplace applications an over sized flue will draw a high volume of room air into the flue and up the chimney then venting it to the outside, wasting heat and effectively ruining the fireplace’s operating efficiency.


A round, insulated flue (used in cast in place lining) is the most efficient design for venting exhausts because of the way flue gases spiral in the chimney. This spiraling of flue gases in round flues eliminates the cold corners found in square and rectangle flues and allows the use of a smaller flue size which increases flue gas velocity. For instance square or rectangle flues are required to be 1/10 the size of the fireplace opening. Or, even as big as 1/8 the size of the fireplace opening, when a rectangle flue has a high aspect ratio. Compare that to round cast in place liners that only require between 1/12 and 1/18 the size of the fireplace opening for the flue size (depending upon the height of the chimney). Insulated metal round flues must always be at the 1/12 size regardless of chimney height, one reason being that metal flues heat up and cool down rapidly and are highly affected by cold outside temperatures. 


Ease of Maintenance - Long Term Protection – Added Equity

Unlined chimneys (and smoke chambers) are difficult to clean. Creosote and soot are trapped in recessed mortar joints and turns in the chimney. Sweeping an unlined chimney usually does not remove all of these deposits, increasing the possibility of a future chimney fire.


As chimneys deteriorate, repair costs climb. Repaired early, a chimney is far less expensive to line than one which requires substantial rebuilding first.


A properly lined chimney (and smoke chamber) will minimize maintenance, allowing a brush to easily sweep it clean. Chimney fire risks are sharply reduced.


A working fireplace that passes an inspection adds tremendous value to a property (especially in historic homes) and deteriorated fireplaces and furnace flues in newer homes take away a lot of value. Because we do so many inspections for home buyers we have seen many a deal fall through because of deteriorated chimney issues, remember it’s not just an aesthetic issue but more importantly a safety issue (it’s not just fire hazards that people are concerned with, but carbon monoxide and sulfur dioxide issues in deteriorated chimneys). No one wants to buy a home that has a chimney with the potential to leak toxic fumes into the house.

Call for an appointment

1(800) 945-0945

Click HereChimney_Liners_-_heating_system_applications.html
Click HereChimney_Liners_-_solid_fuel_applications.html

Relative Articles:

Choose The Application For Your Liner


Chimney_Liners_-_heating_system_applications.html
Chimney Liner for:
gas and oil heating systems - furnaces, boilers & water heatersChimney_Liners_-_heating_system_applications.html

or


Chimney_Liners_-_solid_fuel_applications.html
chimney liner for: 
wood stoves, coal stoves, pellet stoves  or fireplacesChimney_Liners_-_solid_fuel_applications.html
Click HereChimney_Liners_-_heating_system_applications.html
Click HereChimney_Liners_-_solid_fuel_applications.html